Independent contractors, licensed in FL

612 cities and towns covered

Chase Cover Replacement in Florida

Galvanized chase covers do not last in Florida. Salt and permanent humidity corrode them from both sides, and the rust streaks down the stucco below.

Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about a chase cover

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chase Cover Replacement in Florida

What to ask for on Chase Cover Replacement

  • Stainless covers made to measure
  • Cross-break so water drains
  • Hurricane-rated fixing
  • Correct collar and storm seal
Call us about this
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Dryer vent cleared end to end in Florida
Dryer vent cleared end to end Long attic runs with several elbows pack solid with lint. The trap catches only a fraction of it.
Stucco cut back to sound material in Florida
Stucco cut back to sound material Patching over debonded render bonds new material to something that has already let go.
Stainless cap fitted and secured in Florida
Stainless cap fitted and secured Stainless throughout including the fixings, and mechanically fixed rather than friction-fitted for storm uplift.

Why they fail faster here

A chase cover is the sheet-metal lid on a framed chimney chase, with a collar around the flue pipe. Builders fit flat galvanized because it is the cheapest part available.

Flat means water stands in the middle. In Florida it also means salt- laden humidity working on both faces continuously. Once it perforates, water goes into the chase onto framing and insulation, and on a stucco- clad chase it debonds the render from behind.

Stainless with a cross-break

A shallow ridge pressed into the sheet forces water to the edges, and stainless does not rust through. It is the last cover the chimney needs.

The collar leaks too

A proper collar with a storm seal seals where the flue pipe passes through. A bead of silicone does not survive a Florida summer.

Hurricanes and what is underneath

Storm wind lifts covers that are merely resting. An open chase then takes rain directly into the framing, and in Florida humidity that framing does not dry.

Look inside before recovering

Water in a framed chase wets framing and insulation with nowhere to dry. A new lid over rotted framing solves half the problem.

Fixing method matters

Ask how it will be secured. Clamped or mechanically fixed, not friction-fitted.

Chase Cover Replacement — frequently asked questions

Is the rust from the chimney or the roof?

On a clad chase, almost always the cover. Masonry and stucco stain white with efflorescence, not orange.

Can a cover be patched?

Temporarily. Once perforated it is thin everywhere.

Are covers made to measure?

Yes — fabricated from measurements taken on the roof.

Does the cap go on the cover?

Separate parts, usually replaced in the same visit.

How long should stainless last?

Decades, including on the coast.

Call now How it works